Actualizaciones de software para los instrumentos de EMZER
| IMAGEN | INSTRUMENTO | ÚLTIMA ACTUALIZACIÓN |
|---|---|---|
 |
EMSCOPE-RX4 | 28/09/2026 - Update version 4.3: EMSCOPE-RX4-4_3.emz - 179.81MB Clickmeter - Recorded measurements can be reprocessed, and are recalibrated when a loss table is corrected. - Measurements are kept when the instrument is switched off and on. - Overload is now marked with sample resolution. - Report: zoomed graph of each detected click and the correction factors applied. - CISPR 14-1 Annex A equipment catalogue in configuration mode. - Settings, including the reference level, are locked while a test is running. External losses - Loss tables can be exported and imported as CSV. User interface - Warning when the reference level is set above the input transient limiter (126.9 dBµV). Fixes - Changing mode no longer disables the internal LISN division factor. - Self-test now checks the Ethernet PHY and runs correctly from any mode. - Front-panel link LED no longer stays lit without a cable. |
 |
EMSCOPE | 28/09/2026 - Update version 4.3: EMSCOPE-4_3.emz - 182.71MB Clickmeter - Recorded measurements can be reprocessed, and are recalibrated when a loss table is corrected. - Measurements are kept when the instrument is switched off and on. - Overload is now marked with sample resolution. - Report: zoomed graph of each detected click and the correction factors applied. - CISPR 14-1 Annex A equipment catalogue in configuration mode. - Settings, including the reference level, are locked while a test is running. External losses - Loss tables can be exported and imported as CSV. User interface - Warning when the reference level is set above the input transient limiter (126.9 dBµV). Fixes - Changing mode no longer disables the internal LISN division factor. - Self-test now checks the Ethernet PHY and runs correctly from any mode. - Front-panel link LED no longer stays lit without a cable. |
¿Qué podemos hacer por ti? Hablemos
Contáctanos
¿Tiene alguna pregunta sobre nuestras soluciones y servicios? Rellene el siguiente formulario y nos pondremos en contacto con usted en breve.
- EMZER Technological Solutions, S.L.
- C/ Pallars 65. 6-4. 08018 Barcelona (Spain)
