A fully integrated system for complete measurements of conducted emissions up to 110 MHz. Fast and accurate EMI measurements and innovative Modal measurements (common and differential mode) for an effective filter design. Check our video demo.



Emscope: Dual FFT-based Modal EMI Receiver

EMI Measurements:

  • FFT-based dual-channel receiver
  • According to CISPR16-1-1
  • Peak, Quasi-Peak and Average Detectors
  • Resolution Bandwidth Filters of 200 Hz, 9 kHz and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
  • The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

Modal Measurements:

  • Real-time results (FFT)
  • Common- and Differential-Mode measurements
  • Speeds up RF filter design and problem solving
  • Better device under test (DUT) characterization
  • Ideal for R&D

Compact and Cost-effective

  • Compact solution easy to move around
  • Integrates all items inside one single box:
    • 2 channel FFT receiver
    • 2 channel 16A single phase LISN
    • Pulse limiter 5W
    • Software
    • Fiber-optic communication

Software included

  • Embedded software with free updates, no installation is required
  • Allows EMI and Modal measurements
  • Waterfall function included
  • Automatic compliance test report (csv, pdf, image)
  • Easy results comparison features
  • Pre-set EMC measuremets settings
  • Oscilloscope mode (optional)

Software Demo

Check the performance of EMSCOPE in the following video:

Technical Specifications

Standard for EMI Test Receiver / LISN
According to CISPR 16-1-1 / 16-1-2 standards
Conducted-Emissions Frequency range
EMSCOPE 30: 9 kHz – 30 MHz
EMSCOPE 110: 9 kHz – 110 MHz
Peak, quasi-peak and average
Type of measurements
Physical (line and neutral) and modal (common and differential mode) conducted emissions
Full spectrum measurement time
Equal to the measurement dwell time, which is totally configurable from 1 s to 15 s
Resolution Bandwidth Filters
200 Hz, 9 kHz and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
Integrated circuits
Pre-amplifier and pulse limiter
AMN impedance / Pre-filter Choke
50 Ω || (50 μH + 5 Ω) / 250 μH
Maximum Continuous Current
Up to 16 A @ 230 VAC (socket dependent; check user manual)
Maximum Continuous Voltage
Up to 300 VAC - 325 VDC (socket dependent; check user manual)
Artificial hand / connector type
510 Ω + 220 pF / 4 mm banana
Connector for EUT / mains
Schuko socket (Type F) / IEC C20

Physical Specifications

195 mm
252 mm
438 mm
8.5 kg

What can we do for you? Let’s talk

Contact us

Do you have any questions regarding our solutions and services? Please fill up the form below and we’ll be in touch with you soon.

  • EMZER Technological Solutions, S.L.
  • C/ Pallars 65. 6-4. 08018 Barcelona (Spain)
Go to Google Maps

    This website uses cookies to enhance your browsing experience. By continuing to visit this site, you consent to our cookies policy. Read Policy